Hydraulic Actuating Gripper
Hydraulic Actuating Gripper
Hydraulic actuating gripper is used in Pultrusion machines for Gripping of shaped products. After the heater we put one griper which is operated by a hydraulic system. This whole system is mounted above the puller which holds out FRP profile and support to the pilling system. In this gripping system we get 2000 kgs to 10000 kgs force.
In this gripping system we use Hydraulic cylinders for the gripping system and oil as medium to applied force. This oil is conserved in the oil tank which capacity is 200 Ltr and this oil is auto cooled by a compressor cooled system.
SPECIFICATIONS
|
Length |
6500 – 8000mm |
|
Width |
1000mm |
|
Height |
2000mm |
|
PULLING CAPACITY |
2000 kgf to 10000 kgf. [And More on Special Req.] |
|
PULLING SPEED |
0.04 Meter/Min. to 1.8 Meter/Min. |
|
DIE CLAMPING BED |
1000mm X 1100mm |
|
MOVING PULLER SIZE |
600 X 600 to 1000 X 650mm [2 Nos.] |
|
GRIPPING |
By Vertical Moving Single or Double Platen Clamping System |
|
CARRIAGE MOVEMENT |
By Hydraulic Power. |
|
CLAMPING FORCE |
By Hydraulic Actuating System |
|
HEATING ZONE |
3 – 9 , Depending upon no. of Grippers |
|
ELECTRICAL POWER REQUIRED |
2.0 to 7.5 Kw for Hydraulic Power Pack Heating Requirement (Depending up on Size of mould) |
|
COLLING WATER REQUIRED |
40 lpm @ 26 – 28 CËš [ form cooling tower ] |
